Product ID:/TLKYDSB HEY'DI SB BONDING LIQUID
MSDS Date:06/01/1995
FSC:8040
NIIN:00F048173
MSDS Number: BZFBD

Emergency Phone: 800-862-2667/216-974-2399

Info Phone: 800-862-2667/216-974-2399

Cage: 49311

Telephone: 708-773-1870

Cage: 49311

1,3-BUTADIENE POLYMER, STYRENE-BUTADIENE POLYMER, SBS, SBS

CAS: 9003-55-8

RTECS: WL6478000

Fraction By Weight: 20-50%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: CAN CAUSE SLIGHT
IRRITATION. INHALATION: CAN CAUSE IRRITATION OF NOSE, THROAT &
LUNGS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHES, NAUSEA.

First Aid:EYES: FLUSH W/A LARGE AMOUNT OF WATER FOR 15 MINS.
INHALATION: REMOVE TO FRESH AIR. SKIN: WASH AREAS THOROUGHLY W/SOAP
& WATER. INGESTION: GIVE 2 GLASSES OF WATER TO DRINK. NEVER GIVE
ANYTHING BY MOUT H TO AN UNCONSCIOUS PERSON. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Flash Point:300F
Extinguishing Media:FOAM, WATER SPRAY, DRY CHEMICAL, CO2 & VAPORIZING
LIQUID TYPE EXTINGUISHING AGENTS.
Fire Fighting Procedures:WEAR SCBA & FULL PROTECTIVE GEAR.
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER >212F. POLYMER FILM
CAN BURN.

Spill Release Procedures:APPROPRIATE PROTECTIVE EQUIPMENT MUST BE WORN
WHEN HANDLING MATERIAL. USE CAUTION FLOORS MAY BE SLIPPERY. CONTAIN
W/INERT MATERIALS. TRANSFER LIQUIDS & SOLID DIKING MATERIAL TO
SEPARATE SUITABLE CONTA INER FOR RECOVERY/DISPOSAL. (SEE SUPP)

Handling and Storage Precautions:KEEP FROM FREEZING, MATERIAL MAY
COAGULATE.
Other Precautions:MONOMER VAPORS CAN BE EVOLVED WHEN MATERIAL IS HEATED
DURING PROCESSING OPERATIONS. AVOID INHALATION OF VAPORS & PERSONAL
CONTACT W/THE PRODUCT.

Respiratory Protection:AIR-PURIFYING RESPIRATORS SHOULD BE EQUIPPED
W/ORGANIC VAPOR CARTRIDGES.
Ventilation:LOCAL EXHAUST TO KEEP WORK AREA BELOW TLV.
Protective Gloves:NEOPRENE
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:CHEMICAL RESISTANT APRON/OTHER IMPERVIOUS
CLOTHING.
Supplemental Safety and Health

Vapor Density:>1
Spec Gravity:0.96
Evaporation Rate & Reference:(N-BU AC = 1): 0.5
Appearance and Odor:MILKY LIQUID
Percent Volatiles by Volume:45.4

Stability Indicator/Materials to Avoid:YES
INCOMPATIBLE MATERIALS
Stability Condition to Avoid:TEMPS >350F, FREEZING
Hazardous Decomposition Products:THERMAL: POLYMER MONOMERS

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.